WHY NOT TRY OUR BEARING SELECTOR - CLICK HERE

Inch/Metric Bearing *

Metric

Imperial

Tolerance *

Standard
ABEC 1-3 (ABIS)

Desired Bore *

Desired Outer Diameter *

Material *

Type *

Standard (straight)

Flanged

Closure *

flange open ball bearings

Metric Series


Bore Ø (d)	Outer Ø (D)	Flange Ø (Df)	Open Width (B)	Open Flange Width (Bf)	Radius (rs - min)	Flange Open Part No	Load Rating Cr(N)	Load Rating Cor(N)	Max Speed Grease (x1000 rpm)	Max Speed Oil (x1000 rpm)	Cage Type
1	3	3.8	1	0.3	0.05	F681	96	26	130	150	W
1	4	5	1.6	0.5	0.1	F691	141	37	100	120	W
1.2	4	4.8	1.8	0.4	0.1	MF41X	112	33	110	130	W
1.5	4	5	1.2	0.4	0.05	F681X	112	33	100	120	W
1.5	5	6.5	2	0.6	0.15	F691X	169	50	85	100	W
1.5	6	7.5	2.5	0.6	0.15	F601X	330	99	75	90	W
2	5	6.1	1.5	0.5	0.08	F682	169	50	85	100	W
2	5	6.2	2	0.6	0.1	MF52	169	50	85	100	W
2	6	7.5	2.3	0.6	0.15	F692	330	99	75	90	W/J/TW
2	6	7.2	2.5	0.6	0.15	MF62	330	99	75	90	WJ
2	7	8.2	2.5	0.6	0.15	MF72	386	129	63	75	W
2	7	8.5	2.8	0.7	0.15	F602	386	129	60	71	W
2.5	6	7.1	1.8	0.5	0.08	F682X	209	74	71	80	W
2.5	7	8.5	2.5	0.7	0.15	F692Z	386	129	63	75	W
2.5	8	9.2	2.5	0.6	0.2	MF82X	558	180	60	67	W
2.5	8	9.5	2.8	0.7	0.15	F602X	552	177	60	71	W
3	6	7.2	2	0.6	0.1	MF63	209	74	71	80	W
3	7	8.1	2	0.5	0.1	F683	311	112	63	75	W
3	8	9.2	2.5	0.6	0.15	MF83	395	141	60	67	J
3	8	9.5	3	0.7	0.15	F693	558	180	60	67	W/J/TW
3	9	10.2*	2.5	0.6	0.2	MF93	571	189	56	67	W
3	9	10.5	3	0.7	0.15	F603	571	189	56	67	W
3	10	11.5	4	1	0.15	F623	631	219	50	60	J/TW
4	7	8.2	2	0.6	0.1	MF74	311	115	60	67	W
4	8	9.2	2	0.6	0.15	MF84	395	141	56	67	W/J/TW
4	9	10.3	2.5	0.6	0.1	F684	641	227	53	63	W/J/TW
4	10	11.2*	3	0.6	0.2	MF104	711	272	48	56	J
4	11	12.5	4	1	0.15	F694	957	350	48	56	J
4	12	13.5	4	1	0.2	F604	957	350	48	56	J
4	13	15	5	1	0.2	F624	1301	488	40	48	J
4	16	18	5	1	0.3	F634	1340	523	36	43	J
5	8	9.2	2	0.6	0.1	MF85	308	120	53	63	W
5	9	10.2	2.5	0.6	0.15	MF95	431	169	50	60	W
5	10	11.2*	3	0.6	0.15	MF105	431	169	50	60	W
5	11	12.6			0.15	MF115	716	282	45	53	J
5	11	12.5	3	0.8	0.15	F685	716	282	45	53	J/TW
5	13	15	4	1	0.2	F695	1077	432	43	50	J
5	14	16	5	1	0.2	F605	1329	507	40	50	J/TW
5	16	18	5	1	0.3	F625	1729	675	36	43	J/TW
5	19	22	6	1.5	0.3	F635	2336	896	32	40	J/TW
6	10	11.2	2.5	0.6	0.15	MF106	496	218	45	53	W
6	12	13.2*	3	0.6	0.2	MF126	716	295	43	50	W/J/TW
6	13	15	3.5	1	0.15	F686	1082	442	40	50	J/TW
6	15	17	5	1.2	0.2	F696	1340	523	40	45	J
6	17	19	6	1.2	0.3	F606	2263	846	38	45	J
6	19	22	6	1.5	0.3	F626	2336	896	32	40	J,TW
7	11	12.2	2.5	0.6	0.15	MF117	455	202	43	50	W
7	13	14.2*	3	0.6	0.2	MF137	541	276	40	48	W
7	14	16	3.5	1	0.15	F687	1173	513	40	50	J
7	17	19	5	1.2	0.3	F697	1605	719	36	43	J
7	19	22	6	1.5	0.3	F607	2336	896	36	43	J/TW
7	22	25	7	1.5	0.3	F627	3287	1379	30	36	J/TW
8	12	13.2*	2.5	0.6	0.15	MF128	543	274	40	48	W
8	14	15.6	3.5	0.8	0.2	MF148	817	386	38	45	J
8	16	18	4	1	0.2	F688	1252	592	36	43	J/TW
8	19	22	6	1.5	0.3	F698	2237	917	36	43	J
8	22	25	7	1.5	0.3	F608	3293	1379	34	40	J/TW
9	14	15.5	3	0.8	0.1	F679	919	468	36	42	J
9	17	19	4	1	0.2	F689	1327	668	36	43	J
9	20	23	6	1.5	0.3	F699	2467	1081	34	40	J
9	24	27	7	1.5	0.3	F609	3356	1444	32	38	J

Notes for all bearing lists

* This dimension is increased by 0.4mm for shielded or seal version
Bearings also available with stainless materials: suffix S or H
Bearing also available with single shield or seal: suffix Z, RS, RU or TS
TTS⁽⁴⁾ uses smaller ball, load rating is lower than standard
Value ⁽⁵⁾ is not based up upon JIS B 1521

WHY NOT TRY OUR BEARING SELECTOR - CLICK HERE

flange open ball bearings

General Information